See also:
- Automatic Foam Cutter - - Plans and drawings for a simple foam cutter, with PC and MAC software versions.
|
- The Baals Wind Tunnel - - Build your own low-cost wind tunnel for $200. Tunnel design developed for NASA K-12 education.
|
- EH Airfoils - - Designed by John Yost, and developed specifically for swept wing tailless aircraft.
|
- Epoxy Safety - - Tips for working safely with epoxy, including discussion of latex gloves.
|
- Hand Towing - - Reprint of a column by Michael Lachowski in Model Airplane News on F3J, hand-tow soaring.
|
- How to Cast Lead Nose Weight - - By Michael Shellim, a relatively simple method of casting lead noseweight to fit accurately inside the nose of your model.
|
- Liftroll Cookbook - - How to design a good wing using a vortex-lattice spreadsheet by John Hazel.
|
- Pressure Sensor-Based Altimeter Circuit - - Includes introduction, what the circuit does, the circuit, the Schematic and PCB layout, tuning and adjusting, installation in the model, use, and parts list.
|
- Project F3F - - Anatomy of a project to design a moulded F3F-class radio control slope soarer, by Adrian Bedford.
|
- R/C Soaring Radio Programming - - Tips on programming full house sailplanes. Articles on programming the JR388 which are also appropriate for the JR783 and 8103.
|
- R/C Soaring UK - - What Do Thermals Look Like by Wayne Angevine, an atmospheric physicist.
|
- The Rotary Driver System - - Introduces an entirely new method of moving hinged surfaces in R/C aircraft. Completely internal to airframe.
|
- Sailplane Performance Analysis - - A theoretical study to evaluate the effect of minimum sink rate, span, and aspect ratio on the performance of a family of conventional radio controlled thermal sailplanes.
|
- See How It Flies - - A new spin on the perceptions, procedures, and principles of flight.
|
- Tubular Hinges - - Knuckle or arrowshaft hinges for gapless hinge lines.
|
- Vacuum Bagging Wings - - Vacuum bagging techniques for foam wings with composite, or wood veneer skins.
|
|